A few years ago, I bought a patio and set up my house on it.
Since then, I’ve built a lot of things on it, including my own kitchen.
My first idea for a patio was an outdoor terrace that would have been ideal for a barbecue, but I quickly found that it was not very good for a backyard BBQ.
I’m not one for outdoor cooking, but after a while I decided to make something that would be a bit more of a weekend getaway, rather than a barbecue.
To build the patio, I started by buying a large rectangular patio mat that was about 6 feet by 4 feet and was a good length for my house.
The patio mat was the centerpiece of my first patio, and I built a little piece of it that would cover the entire length of the mat.
Then I began building a larger rectangle that would sit on the mat and hold the patio up.
This rectangle was also about 4 feet wide by 2 feet tall.
Using a small piece of plywood and a screwdriver, I drilled holes in the mat that would allow me to hold the pieces together.
After about 5 minutes of working with the mat, I had a great place to build a patio.
I had built the rectangle by laying the mat flat on the ground, then taking a screw driver and drilling a hole in the middle of the rectangle.
When the hole was in place, I put the mat on the patio.
As soon as I finished drilling the hole, I grabbed a couple of pieces of wood and used them to hold my pieces of fabric that I would cut into little squares.
At this point, I wanted to add a small section of the patio back into the backyard, so I added a bit of wood on the top and bottom, then started building a little section of fabric on the other side of the fabric.
Eventually, I was able to make two patio squares.
The two sections of fabric I built were used to build the small piece that would hold the back of the table up and the fabric that would hang from the front of the terrace.